Dust control
Fine respirable dust may form during charging, transfer or clean-up. Use closed transfer, local exhaust ventilation and low-drop charging where practicable. Do not use compressed air for clean-up.
Safety and handling
This page summarizes the bilingual WYR-960 SDS Rev. 3.1 dated 17 August 2026. It supports preliminary review and does not replace the formally authorized SDS for the destination market.
Fine respirable dust may form during charging, transfer or clean-up. Use closed transfer, local exhaust ventilation and low-drop charging where practicable. Do not use compressed air for clean-up.
Use safety glasses with side shields, work gloves and suitable protective clothing. Where ventilation is insufficient or dust limits may be exceeded, use a properly selected and fitted P2, N95 or higher particulate respirator within a complete respiratory-protection program.
Keep sealed and dry in a cool, ventilated area. Protect bags from moisture, contamination and damage. Segregate from strong acids.
Restrict access, avoid generating dust and collect with industrial vacuum equipment suitable for fine powder. Prevent large releases from entering drains, soil or surface water.
Provisional classification
Based on the supplied composition and physical-form information, the mixture is provisionally not classified as hazardous. This conclusion must be reviewed for the final composition, impurities, particle-size data and destination jurisdiction.
Transport information
The current draft lists no UN number and describes the product as not regulated under ADR/RID/ADN, IMDG or IATA based on available information. A carrier or port may still request a transport classification report.
Document access
The emergency contact has been confirmed. The controlled PDF is not offered as a public download until formal authorization is completed. The applicable approved SDS will be supplied during technical qualification before sample or commercial shipment.